- Resolver Based Electronic Cam Switch
- Time Based Brake Monitoring
- Plain English Diagnostics
- Lost Motion Detection
- Inch, Single & Continuous Operation
- Continuous on Demand
- Reverse Direction Detection (except in Inch Mode)
- Micro Inch (timed jog for setup)
- Top Stop Push Button
- Emergency Stop Push Buttons (locking type)
- Dual Palm Button or Foot Switch Selector Switch
- Two Operator Station Inputs (user selectable)
- Two Light Curtain Inputs
- Light Curtain Muting on Up Stroke
- Low Clutch/Brake Air Pressure Input
- Low Counter Balance Air Pressure Input
- Two User Programmable relay Outputs
A diagnostic screen can be accessed to allow visual indication of an input changing state. If an input is 'ON' a '1' will be displayed. If it is 'OFF' a '0' will be displayed. By pressing buttons, activating switches or cycling the press, the status of the inputs can be determined making it easy to find faulty components.
All errors that occur are displayed and a suggestion for remedy is offered.
All Systems Meet and/or Exceed OSHA 1910.217, ANSI B11.1, CSA and European Standards.
Control Reliability
Twin microprocessors powered by their own independent power supplies independently perform clutch/brake and input logic while simultaneously monitoring each other. Each processor powers an independent dual air valve relay and monitors the other relay to check opening and closing.
Relays have force guided contacts. In the event of a relay failure the press would be shut down instantly and the LCD will display "RELAY FAULT". Relays are field replaceable.
If either processor fails, the control will issue a stop signal and prevent further strokes of the press until the fault is corrected. The fault will be displayed in plain English on the LCD.
All vital functions are stored in nonvolatile EEPROM and battery backed memory for maximum redundancy and reliability.
SPECIFICATIONS
Enclosure - NEMA 12
Dimensions - 16" x 11" x 6" 16 Gauge Steel
Power - Line Voltage 120/220 VAC 50/60 Hz
Display - Back Lighted 4 Lines by 20 Characters
Warranty - One Year from Date of Shipment from the factory.
Homepage | Contact Metal Tech | Instruction Manuals | Punch Press Controls
Laser Sentry | Hydraulic Press Controls | Operator Controls | Press Brake Safety Controls
Light Curtains | Air Line Equipment | Brake Monitoring | Cam Switches
Motor Starter Panels | Accessories | Price List | Terms & Conditions
Email: info@metaltechcontrols.com